This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: command for modifing the hw address
- From: rameshs at danlawinc dot com
- To: nickg at ecoscentric dot com
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 13 Mar 2003 20:27:52 +0530
- Subject: RE: [ECOS] command for modifing the hw address
Hi,
Not for A&M board.I am using the available A&M
board code to port our customised board.Our board is just similar to A&M
board and features.
I have a document redboot usermanual ,But i did not found any command.Can
you please tell where i get the command to set the H/W address .I am using
the latest version of the ecos.Thank you for your kind help.
Thank You,
S.Ramesh Chandra.
-----Original Message-----
From: Nick Garnett [mailto:nickg at ecoscentric dot com]
Sent: Thursday, March 13, 2003 7:34 PM
To: rameshs at danlawinc dot com
Cc: ecos-discuss at sources dot redhat dot com
Subject: Re: [ECOS] command for modifing the hw address
rameshs at danlawinc dot com writes:
> Hi,
> Can any one know how to acess hardware address(ethernet address) and
> modify the hardware address from the redboot configuration data portion
> with a command .I want to know the command.
> If not can any one give how to add a command to redboot to acess the
> ethernet address .I am working on porting redboot on adder board.
>
If this is the A&M Adder board, then you don't need to do that, it
already has RedBoot support and the necessary command to set the MAC
address is already there. I have one right here, and it works fine.
Make sure you are using the latest CVS version of eCos and not V1.3.1.
--
Nick Garnett eCos Kernel Architect
http://www.ecoscentric.com/ The eCos and RedBoot experts
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss