This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
eCos on the IXP1200 eval board
- From: "Gottlieb, Rajesh" <RGottlieb at WhiteRockNetworks dot com>
- To: "'ecos-discuss at sources dot redhat dot com'" <ecos-discuss at sources dot redhat dot com>
- Date: Tue, 8 Jul 2003 10:54:09 -0500
- Subject: [ECOS] eCos on the IXP1200 eval board
I could use some pointers from anyone who's built eCos for the IXP1200 eval
board. Is there a particular template that is a better starting point for
the configtool or ecosconfig? What changes are needed from one of the
related templates? I'm guessing one of the SA-1100 templates would be the
closest, but the memory addresses and serial/ethernet settings are probably
not right. Once I get a decent candidate load what's the best way to get it
on the eval board? I've installed the cygmon bootloader from netwinder.org,
but as far as I can tell it's mostly for booting linux. Can that be made to
work? I know redboot is supposed to the way to go, so if anyone's had
success with it on the IXP1200 I'd appreciate info on that as well.
Thanks for any advice
Rajesh
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss