This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: redboot.img


well, yes i have made the startup type as ROM and my reset_vector also
points to the correct address i.e 0x30000040 in the redboot.img file..
but still when i burn this redboot.img in to the flash-on-board and when
power on, no output seen..

  but the redboot works fine when i download redboot.bin into the flash 
and execute "Go" using the AXD tool from ADS.

but with out the AXD tool the redboot.bin file also fails to show any
output on the hyperterminal.

what could be the problem..?

satish




On Mon, 28 Jul 2003 15:44:40 +0530
"mohanlal jangir" <mohanlaljangir@hotmail.com> wrote:

> Did you specify startup type as ROM while building RedBoot? Also you have to
> ensure that while booting your hardware jumps to memory location where
> RedBoot resides or you have to tell it explicityly via boot monitor.
> 
> Regards
> Mohanlal

-- 
Satish Kumar <satish@bvt.sc.sanyo.co.jp>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]