From: Satish Kumar <satish@bvt.sc.sanyo.co.jp>
To: "Michael Anburaj" <embeddedeng@hotmail.com>
CC: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] redboot.img
Date: Tue, 29 Jul 2003 11:32:19 +0900
O.k,
using the AXD tool, everytime i have to set the PC value and click
"Go" to get the RedBoot Debug environment run successfully..and this
works fine. i have redboot.bin burnt in the flash in this case.
now, i m expecting to see the same output on the hyperterminal when i
just power on my system with the redboot.bin or redboot.img file burnt
in the the flash. but it fails to do so. the reset_vector are set to
0x3000040 and i have set the ROM bootup option too in the config-tool..
its is a remapped address which is mentioned above...
plz kindly suggest me a solution.
On Tue, 29 Jul 2003 02:16:24 +0000
"Michael Anburaj" <embeddedeng@hotmail.com> wrote:
> You don't need any other primary boot monitor to boot Redboot. Well,
some
> platforms do have monitors like Angle at 0x0000.0000 & people use it as
the
> primary boot to burn Redboot elsewhere in flash. You don't have to worry
> about that.
>
> But in your earlier email, you had mentioned about 2 execution cases.
> 1. With AXD - (which works for you)
> 2. Without AXD (don't work)
>
> Provide me with details, and then I may be in a position to answer to
some
> of you questions.
>
> Cheers,
> -Mike.
>
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
--
Satish Kumar <satish@bvt.sc.sanyo.co.jp>