This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Synthetic Target Ethernet Driver
- From: "Giovanni Perbellini" <perbellini at sci dot univr dot it>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Tue, 29 Jul 2003 17:09:35 +0200
- Subject: [ECOS] Synthetic Target Ethernet Driver
Hi all,
I'd like to use ethernet synthetic target driver.
I created a tap device (called tap0) on my linux PC; its IP address is
10.1.1.1/24 (I used ifconfig command to verify the creation).I configured my
eCos ethernet synthetic target driver with eth0=10.1.1.10/24
In the file .../packages/devs/eth/synth/ecosynth/v2_0/host/ethernet.tdf I
have connected the eCos eth0 with the tap device:
synth_device ethernet {
eth0 ethertap tap0
....
}
I have a client eCos application that it connects, via socket, on the
10.1.1.1:4444 IP address; on my Linux PC I have a server socket
application that it listens on 4444 port.When my eCos application tries to
connect, the connection fails.
Where is my error?
Regards
Giovanni Perbellini
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss