This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: MPC 860 reboot question.
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Ottawa Guy <ottawaguy81 at yahoo dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: 04 Dec 2003 10:16:37 -0700
- Subject: Re: [ECOS] MPC 860 reboot question.
- Organization: MLB Associates
- References: <20031204170813.98178.qmail@web13004.mail.yahoo.com>
On Thu, 2003-12-04 at 10:08, Ottawa Guy wrote:
> Hi,
> I have a general question for all the MPC860 user.
> I have 860 board which is running Ecos. I am pumping
> traffic into it, once in a while it just reboots. Is
> there any common reboot module for 860. So that I
> could put a break point there and investigate the
> cause of the reboot. I am not sure where the reboot is
> comming from h/w or s/w. Any suggestion would be
> helpful.
Which 860 board? What application are you running?
While eCos does define a HAL interface to reset a board, it's not
used by any of the standard kernel (drivers, etc). My guess is that
you either have a hardware problem or are creating some sort of
machine check condition (which may cause the processor to reset)
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss