This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: MPC 860 reboot question.
- From: Ottawa Guy <ottawaguy81 at yahoo dot com>
- To: Gary Thomas <gary at mlbassoc dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 4 Dec 2003 10:16:11 -0800 (PST)
- Subject: Re: [ECOS] MPC 860 reboot question.
Thanks Gary,
Is there any way I could put a break point on the
exception. I am pretty sure the problem is either h/w
or some exception caused by my program. How do I know
what code caused this.
We am using our own proprietary board.
Ottawa
--- Gary Thomas <gary@mlbassoc.com> wrote:
> On Thu, 2003-12-04 at 10:08, Ottawa Guy wrote:
> > Hi,
> > I have a general question for all the MPC860 user.
> > I have 860 board which is running Ecos. I am
> pumping
> > traffic into it, once in a while it just reboots.
> Is
> > there any common reboot module for 860. So that I
> > could put a break point there and investigate
> the
> > cause of the reboot. I am not sure where the
> reboot is
> > comming from h/w or s/w. Any suggestion would be
> > helpful.
>
> Which 860 board? What application are you running?
>
> While eCos does define a HAL interface to reset a
> board, it's not
> used by any of the standard kernel (drivers, etc).
> My guess is that
> you either have a hardware problem or are creating
> some sort of
> machine check condition (which may cause the
> processor to reset)
>
> --
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
>
>
> --
> Before posting, please read the FAQ:
> http://sources.redhat.com/fom/ecos
> and search the list archive:
> http://sources.redhat.com/ml/ecos-discuss
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss