This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: MPC860 - devs/serial/quicc
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Philip Soeberg <ecos at soeberg dot net>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: 05 Jan 2004 06:06:39 -0700
- Subject: RE: [ECOS] MPC860 - devs/serial/quicc
- Organization: MLB Associates
- References: <20040105104536.98B291003DB@hermes.chez-thomas.org>
On Mon, 2004-01-05 at 03:45, Philip Soeberg wrote:
> Now that the QUICC serial issue is up...
>
> Are there any plans on extending the routing of SCC3 to CPU types other than
> MPC850/MPC852T?
>
No reason beyond the fact that none of the developers have access to
an 823 based system.
> Sadly, I'm forced to use SCC3 on an MPC823 CPU, why I have been forced to
> implement various hacks to the QUICC module... As I don't know the reason
> why CPU's other than the ones mentioned isn't supported, I have not created
> a generic patch for the CVS...
Please do try to make a generic patch.
>
> Regards,
> -=[ Philip Soeberg ]=[ ecos@soeberg.net ]=-
> * I am happy as a clam
> (ignoring the issue of why or when a clam might be particularly happy)
>
> -----Original Message-----
> From: ecos-discuss-owner@sources.redhat.com
> [mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of Gary Thomas
> Sent: 2. januar 2004 17:17
> To: nprasad3@gmu.edu
> Cc: ecos-discuss@sources.redhat.com
> Subject: Re: [ECOS] MPC860 - devs/serial/quicc
>
> On Fri, 2004-01-02 at 09:11, nprasad3@gmu.edu wrote:
> > Hi,
> >
> > Does the serial device driver support SCC1? I could see
> > only conditionals for SMC1 and SMC2 but hal/powerpc/quicc
> > has support for SCC1.
> >
> > In order for me to utilize SCC1 as the serial port under
> > eCos would I have to provide support for it under devs/serial/quicc?
>
> All combinations of SMC1/SMC2/SCC1/SCC2/SCC3/SCC4 should be supported
> for both diagnostic I/O and high-level (interrupt driven) drivers.
> Get the latest CVS - not all of this was in v2.0
>
> Look at the A&M Viper for examples of how to configure using both
> SMC1 & SCC1, including console (RedBoot) and /dev/serX I/O
>
> --
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
>
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss