This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
pxa2x0 - hal_diag.c problems
- From: Oscar <martinos72 at libero dot it>
- To: Ecos-Discuss <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 06 Feb 2004 15:41:47 +0000
- Subject: [ECOS] pxa2x0 - hal_diag.c problems
Hi guys,
i'd need to move on my board the debug/diagnostic serial port from
FFUART to BTUART (my cpu is a PXA255 xscale) .
I have done:
- change in hal_arm_xscale_mpc50.cdl the "implements
CYGHWR_HAL_ARM_PXA2X0_BTUART" in "implements CYGHWR_HAL_ARM_PXA2X0_FFUAT"
- enable the BTUART clock (in plf_hardware_init() )
- enable the BTUART GPIO ( in hal_platform_setup.h)
and build REDBOOT board configuration.
The problem is that i can't see redboot on the PC terminal. Does anyone
have an idea?
Thanks
OSCAR
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss