This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

some questions about run-time image


Hello all,

I try to run ecos in a board with MPC8250, SMC1 for console, and FCC3/LXT971 for ethernet.
I take the rattler variant for the base, and change some codes for our configuration. Now the RedBoot seems OK, at least the console and ethernet can work.


But when I want to run the ecos run-time image with the simplest hello program, some
questions happened.


1. When CYGSEM_HAL_USE_ROM_MONITOR enabled, load the run-image from tftp then run.
There are console outputs. But the network can be accessed. Both DHCP and static configuration
are tried.


2. When CYGSEM_HAL_USE_ROM_MONITOR disabled, tftp load and run, the console just like
RedBoot> go
$O496E69742064657669636520272F6465762F73657231270A#71
then stalled. The network can't be accessed either.


How to deal with it?

Thanks and best regards,

Rex Cheng

_________________________________________________________________
与联机的朋友进行交流,请使用 MSN Messenger: http://messenger.msn.com/cn



-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]