This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Re: Source Debug by Multi-ICE
JediView of Micetek can accept many file format. It is a taiwan company, you can refer to www.micetek.com or www.micetek.com.tw
Maybe you can find good local support.
----- Original Message -----
From: "David Lewin" <david.lewin@europe-technologies.com>
To: "eCos discussion" <ecos-discuss@ecos.sourceware.org>
Sent: Wednesday, June 30, 2004 3:37 PM
Subject: Re: [ECOS] Re: Source Debug by Multi-ICE
> As I have the same toolchain, I confirm that the
> proprietary Arm eXtended File (AXF) is the only
> format accepted by ADS and RealView.
>
> Of course there is no Elf to Axf converter.
>
> Some solutions I propose are :
>
> - try another toolchain/editor : Metaware accept many formats
> - try another JTAG connection : Raven , Chameleon
>
> Hope this helps
>
> DL
>
> ----- Original Message -----
> From: "Jonathan Larmour" <jifl@eCosCentric.com>
> To: "pb.jack" <pb.jack@powerbase.com.tw>
> Cc: "eCos discussion" <ecos-discuss@ecos.sourceware.org>
> Sent: Wednesday, June 30, 2004 1:52 AM
> Subject: [ECOS] Re: Source Debug by Multi-ICE
>
>
> > pb.jack wrote:
> > > Hi all,
> > > My platform is GCC+ADS1.2+Multi-ICE 2+ECOS 2, the test program running
> > > in good status but don't know why I can't see the variable value in
> > > ADS.
> > > Is anybody know how to fix this?
> >
> > Essentially you can't. ADS does not accept debug info from executables
> > produced by GCC.
> >
> > Jifl
> > --
> > eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
> > --["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine
> >
> >
> > --
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>