This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: using fconfig
On Wed, 2004-08-04 at 03:28, David Lewin wrote:
> The facts :
> I'm workin in flash with an ARM processor.
>
> the fis init is working ok, I can see
> -Redboot
> - Redboot config
> - FIS directory
>
> directories that have been created.
>
> My question is :
>
> what can make a fconfig -i crashing redboot[ROM] when I try
> to create a new config ?
> while debugging in RAM (insight & gdb dislike Flash debugging)
> is ok to create my config.
Check that the FLASH drivers you use are ROM-friendly. In other
words, while you are writing to the FLASH, you can't be executing
from it at the same time.
Note: probably the easiest way around this is to run RedBoot
in ROMRAM mode instead.
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss