This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Networking tests error message "Warning : Driver can't set multi-cast mode"
- From: "Wu Michael" <michael0826 at hotmail dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 10 Aug 2004 11:46:13 +0800
- Subject: [ECOS] Networking tests error message "Warning : Driver can't set multi-cast mode"
- Bcc:
Hello ,
I have a big trouble. Please give me some information.Thanks.
When i use the eCos Networking Tests to test ethernet driver in
SNDS100 target board ,
the HyperTerminal show messages are as follows ,
errno.cxx cyg_error_get_errno_p Cyg_Thread
[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'ks32c5000'
Enter to ethernet initial
ks32c5000_eth_init()
MAC address 08:88:12:34:56:78
ks5000_ether: installInterrupts()
Enter to ethernet initial ...
EthInit(08:88:12:34:56:78)
ks32C5000 eth: 34:12:88:08:78:56 Hardware CRC
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
IFP: 0x0105e19c, next: 0x010c7f20
IFP: 0x010c7f20, next: 0x00000000
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x0105ea6c)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x0105e524)
New domain route at 0x00000000
[cyg_net_init] Init: cyg_route_init(0x00000000)
[cyg_net_init] Done
start cpu index=6 schedule=1080bf0,&queue_map=1080bec,queue_map=800084c0
start cpu index=7 schedule=1080bf0,&queue_map=1080bec,queue_map=80008480
start cpu index=a
schedule=1080bf0,&queue_map=1080bec,queue_map=80008400
Start FTP test
ks32c5000_eth_start()
[eth_drv_ioctl] Warning: Driver can't set multi-cast mode
<====================
ks32c5000_eth_stop()
ks32c5000_eth_start()
Enter to ethernet initial ...
EthInit(08:88:12:34:56:78)
ks32C5000 eth: 34:12:88:08:78:56 Hardware CRC
[eth_drv_ioctl] Warning: Driver can't set multi-cast mode
<====================
start cpu index=7
schedule=1080bf0,&queue_map=1080bec,queue_map=80008480
mutex.cxx sleep return call enqueue
start cpu index=7
schedule=1080bf0,&queue_map=1080bec,queue_map=80008080
start
$$ MAC Rx Frame : Good ( 0 ), Error ( 0 )
--------------------------------------
- Current Frame Descriptor Pointer : 05353734
Frame Data Ptr : 85353934
Reserved Field : 00000000
Status and Frame Length : 00000000
Next Frame Descriptor : 05353744
--------------------------------------
- BDMARXPTR : 05061630 - BDMASTAT : 00040000
- BDMARXCON : 00006aef - BDMARXLSZ : 000005f0
- CAM Base : 08881234 - BDMARXBUF : 00000001
- MACCON : 00000000 - CAMCON : 00000014
- MACRXCON : 00002f01 - MACRXSTAT : 00000000
--------------------------------------
_________________________________________________________________
免費試聽 MSN 英語學習:和真人老師線上學英文 http://www.msn.com.tw/english/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss