This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
redboot install on ipaq 3600
- From: Sean Moss-Pultz <sean at moss-pultz dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 7 Dec 2004 22:47:46 +0800
- Subject: [ECOS] redboot install on ipaq 3600
This is my first post to this list. I've done my best to search google
and other resources but they all end up dry. Hopefully somebody can
help me.
I have an iPAQ 3600. I starting to install RedBoot on it (all files
from http://sources.redhat.com/ecos/boards/redbootbins/ipaq/) and ran
into some problems. Basically I tried to use the LCM keypad and since
it wasn't calibrated correctly I mistyped a command. I'm sorry but I
don't know exactly which command it was. I didn't save the output. Then
I tried to retype the first command (lo -r -b 0x100000 redboot_ROM.bin)
and this also caused more errors. Basically along the lines of it
cannot format. So I re-flashed my device by downloading the flash
install from HP. This worked fine. I figured I could now try to install
RedBoot again. Here is my (unfortunate) output:
------------------------------------------------------------------------
-----------------------------------------------------
+FLASH: 0x50000000 - 0x51000000, 64 blocks of 0x00040000 bytes each.
FLASH configuration checksum error or invalid key
... Waiting for network card: ..........No network interfaces found
RedBoot(tm) bootstrap and debug environment - built 09:51:53, Jun 22
2001
Platform: Compaq iPAQ Pocket PC (StrongARM 1110)
Copyright (C) 2000, 2001, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x0004f000-0x01fb0000 available
RedBoot>
------------------------------------------------------------------------
-----------------------------------------------------
I figured maybe I could proceed so I just entered the first command
again:
(lo -r -b 0x100000 redboot_ROM.bin)
and here is the output:
------------------------------------------------------------------------
-----------------------------------------------------
RedBoot> lo -r -b 0x100000 redboot_ROM.bin
... Erase from 0x00080000-0x00000000:
... Unlock from 0x00040000-0x00093d48: ..
... Erase from 0x00040000-0x00093d48: Err = 200020
initialization failed 0x00040000: 0x2(Error trying to erase)
... Lock from 0x00040000-0x00093d48: Err = 500050
------------------------------------------------------------------------
-----------------------------------------------------
I have searched for solutions for these error messages and it has lead
nowhere. Does any one have an idea?
Thanks in advance!
SeanAttachment:
smime.p7s
Description: S/MIME cryptographic signature