This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

PPP in the SMDK-2410


Hi,

I use ecos-cvs in my smdk2410 board...

I know that hardware flow control is not yet supported in the smdk2410 board.

I tested ppp_up program in smdk2410 board.
/dev/ser0 for GDB...
/dev/ser1 for PPP...

The output to ser1 was only "BAUD:017"... No more output to ser1 !!!

PPP program can't operate properly in smdk2410 board.... is it???

How to operate PPP program in smdk2410 board ???

CYGINT_IO_SERIAL_FLOW_CONTROL_HW, CYGINT_IO_SERIAL_LINE_STATUS_HW ... must be supported ???





-------------------------------------------------
Your Life on the Net
DreamWiz Free Mail @ http://www.dreamwiz.com/



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]