Re: [ECOS] Redboot problem with EBD9312 - help

[Gary Thomas <gary at mlbassoc dot com>]

On Fri, 2005-03-18 at 18:13 +0530, Mukund JB. wrote:
> Dear all,
> 
> Sorry, the attachment missed.
> I am working on the new EBD9312 boards we got today.
> I have downloaded the redboot.bin successfully; I hooked the network
> cable. 
> 
> When we start the board for the first time after installation of redboot
> we get the following message just before the redboot prompt:-
> 
> 	+Flash configuration checksum error or invalid key
> 	EP93xx - no EEPROM, static ESA, or Redboot config option.
> 	No network interfaces found
> 
> The board is in the network having access to the DHCP server. The IP
> address is also not assigned at this point of time. After I tried to
> assign static IP address using the "fconfig -i" command, The IP address
> says 
> 
> 	#ip_address
> 	IP:0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
> 	Default server: 0.0.0.0, DNS server IP: 0.0.0.0
> 	
> Pinging to the HOST also failed.
> 
> I tried reinstalling the redboot.bin file onto the device. 
> I have generated minicom.cap file this time which is attached to this
> mail when configuring redboot. Please see the attached file for more
> information. 
> 
> Would you please guide me what could be the problem? I am struck here, I
> cannot go any where it this is solved. How would I solve this?
> 

Try setting the ethernet "MAC" address when you run 'fc'.  Then reboot.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss