This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: porting Web server in Ecos
- From: "Aniket S Joshi" <aniketsj at myw dot ltindia dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>,<grante at visi dot com>
- Date: Mon, 02 May 2005 16:02:28 +0530
- Subject: [ECOS] Re: porting Web server in Ecos
Hi Grant,
Thanks for your quick reply.
pls find reply below...
>Yes. The demo worked fine for me, and we've since shipped a
>lot of units of several different product models that have the
>GoAhead web server in them.
I am using ecos 2.0 + Hitachi 7729 Processor combination to port Goahead web server.
Can you pls tell me about your system combination on which Goahed web server is running ?
>>Have you tried enabling the diagnostic messages in the web
>>server?
No, How to enable this Diagnostic option for web server? Do i need to set some #DEFINE for this?
Currently I am using Diagnostic options on ecos configuration tool.
>> Have you tried telnetting to the port to see if the server is
>> listing?
Yes... But no response from the board
But Ping is working fine.
>>Have you tried using tcpdump or Ethereal to watch the network
>>traffic.
Yes, I am using similer software , where i am getting response from board like page can not be displayed....etc
>>Have you done any debugging at all?
yes ....
Waiting for your reply
Thanks again for your valuable support
Thanks and regards,
Aniket Joshi
Senior Software Engineer
Larsen & Toubro Ltd,
Embedded System & Software (EmSys),
KIADB Industrial Estate Hebbal
Hootagalli, Mysore,
State: Karnataka,
India
PIN: 570018
Ph:+91-821-2402561 Ext:2765/2773
FAX: +91-821-2403752
http://www.lntemsys.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss