This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
go cmd creates prob - Pl do reply sirs
- From: Raghavendar Mani <raghav82 at gmail dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 10 May 2005 18:15:19 +0530
- Subject: [ECOS] go cmd creates prob - Pl do reply sirs
- Reply-to: Raghavendar Mani <raghav82 at gmail dot com>
Respected Sir,
iam using pentium166 Mhz m/c as my target. i have installed
ecos and its configuartion tool in linux. i have created redboot.bin
file and succusfully runs in my target m/c. i have created sample
applictaion and created a binary image. using linux i was unable to
port to target machine so i transfered from windows using
hyperterminal(copied the sample.bin file to windows and transfered). i
got succesfully transfered and when i give go command its the gives me
the following err msg
redboot>go
hal_arch_default_isr: 42 (data: 0)
$T0408:03000000;04:e0ff0900;#1b
when i give enter after this it repeats "$T0408:03000000;04:e0ff0900;#1b".
llly in linux using telnet i connect to target m/c, how to disconnect
once connected.
* how to verfiy in redboot what files or applictaions are loaded to RAM.
* when i give reset command in target m/c, m/c is not reseting, cursor
is blinking.
help needed very urgent in this case..Pl do reply sir.
thanking yor
M.Raghavendar
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss