This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Re: "Fis init" failed on EB40A
Thanks for your reply,
but that flag is already set.
Any other idea?
Jaws
----- Original Message -----
From: "Jani Monoses" <jani@iv.ro>
To: <ecos-discuss@sources.redhat.com>
Sent: Wednesday, July 27, 2005 1:17 PM
Subject: [ECOS] Re: "Fis init" failed on EB40A
>
> > RedBoot>
> > RedBoot> fis init
> > About to initialize [format] FLASH image system - are you sure (y/n)? y
> > *** Initialize FLASH Image System
> > Warning: device contents not erased, some blocks may not be usable
> > ... Erase from 0x011f0000-0x01200000: $T0a0f:80018001;0d:e43d0000;#7b
> >
> > and I have to reset the board.
> > Any suggestions?
>
> I wonder if it could be the flash bug mentioned in atmel erratas.
> Is CYGHWR_DEVS_FLASH_ATMEL_AT49XXXX_ERASE_BUG_WORKAROUND set
> in the at49 flash driver cdl?
> Jani
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss