This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: "Fis init" failed on EB40A
- From: "Paul D. DeRocco" <pderocco at ix dot netcom dot com>
- To: "eCos Discuss" <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 27 Jul 2005 10:06:14 -0700
- Subject: RE: [ECOS] "Fis init" failed on EB40A
> From: Jaws
>
> I have some problem with flash and fis commands.
> I' using the EB40A with the redboot versio
>
> RedBoot> version
>
> RedBoot(tm) bootstrap and debug environment [ROM]
> SRI release, ATMEL bootstrap v2.20 - built 11:05:22, Mar 6 2002
>
> Platform: Atmel AT91/EB40 (AT91R40807 ARM7TDMI)
> Copyright (C) 2000, 2001, Red Hat, Inc.
>
> RAM: 0x00000000-0x00040000, 0x00009b98-0x0002f000 available
> FLASH: 0x01000000 - 0x01200000, 32 blocks of 0x00010000 bytes each.
> RedBoot>
>
> when I tried to make the command "fis init' this is the result:
>
> RedBoot>
> RedBoot> fis init
> About to initialize [format] FLASH image system - are you sure (y/n)? y
> *** Initialize FLASH Image System
> Warning: device contents not erased, some blocks may not be usable
> ... Erase from 0x011f0000-0x01200000: $T0a0f:80018001;0d:e43d0000;#7b
>
> and I have to reset the board.
> Any suggestions?
Are you running with the two halves of the flash swapped? I'm not sure the
driver is smart enough to deduce that.
--
Ciao, Paul D. DeRocco
Paul mailto:pderocco@ix.netcom.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss