This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: interrupt/virtual vectors confusion

From: Andrew Lunn <andrew at lunn dot ch>
To: Matt Sartori <msartori at hanoverdisplays dot com>,ecos-discuss at ecos dot sourceware dot org
Date: Tue, 16 Aug 2005 16:56:19 +0200
Subject: Re: [ECOS] interrupt/virtual vectors confusion
References: <F9885E669725F248A1F6DB9109FDD67905E4D5@Molly.hanover.local> <20050816145353.GE22397@lunn.ch>

> > A quick look at my datasheet mentions that RAM is mapped both to
> > 0x20000000 and 0x00000000, but only in RAM boot mode. I am currently
> > running in user flash boot mode.
> 
> You probably need to change this so that it runs in user flash boot
> mode. If you don't have RAM at 0x0 there is no way to change the
> vectors. I expect if you run the eCos tests which test interrupts they
> will fail.

Arg! I ment to say RAM boot mode......

        Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

References:
- RE: interrupt/virtual vectors confusion
  - From: Matt Sartori
- Re: interrupt/virtual vectors confusion
  - From: Andrew Lunn

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]