This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: a question about anoncvs
- From: Indra Antonius Simalango <indra at vlsi dot itb dot ac dot id>
- To: Gary Thomas <gary at mlbassoc dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 25 Aug 2005 10:17:39 +0700 (WIT)
- Subject: Re: [ECOS] a question about anoncvs
Thank you for your response.
I add these on my ecos.ecc :
-----------------------------------------------------------------------
cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
user_value ""
};
cdl_component CYG_HAL_STARTUP {
user_value GRUB
};
cdl_component CYGPKG_IO_SERIAL_TERMIOS {
user_value 1
};
cdl_component CYGPKG_IO_SERIAL_TERMIOS_TERMIOS0 {
user_value 1
};
cdl_component CYGPKG_IO_SERIAL_DEVICES {
user_value 1
};
cdl_component CYGPKG_IO_SERIAL_I386_PC_SERIAL0 {
user_value 1
};
cdl_component CYGPKG_IO_SERIAL_I386_PC_SERIAL1 {
user_value 1
};
----------------------------------------------------------------------
I'd like to use POSIX termios in order to do serial communication with
modem. Before doing anoncvs, I use the original ecos v-2.0 repository, and
there's no problem with this configuration.
Is there anything wrong with this?
Thank you.
On Wed, 24 Aug 2005, Gary Thomas wrote:
> On Thu, 2005-08-25 at 04:01 +0700, Indra Antonius Simalango wrote:
> >
> > Dear all,
> >
> > I'd like to use fat filesystem for my target i386pc. In order to do that,
> > I do anoncvs to update my repository. Here're my steps work :
> >
> > #cd ~/anoncvs
> > #cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P ecos
> > #cvs -z3 update -d -P
> > #mkdir ~/tests
> > #cd ~/tests
> > #export ECOS_REPOSITORY=~/anoncvs/ecos/packages
> > #/opt/ecos-2.0/tools/bin/ecosconfig new pc all
> > #vi ecos.ecc
> > ... editing ecos.ecc ...
> > #/opt/ecos-2.0/tools/bin/ecosconfig tree
> > #make -s
> > headers finished
> > /home/indra/anoncvs/ecos/packages/hal/i386/pc/current/src/plf_misc.c:
> > In function `hal_platform_init':
> > /home/indra/anoncvs/ecos/packages/hal/i386/pc/current/src/plf_misc.c:129:
> > parse error before `lo'
> > /home/indra/anoncvs/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131:
> > `lo' undeclared (first use in this function)
> > /home/indra/anoncvs/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131:
> > (Each undeclared identifier is reported only once
> > /home/indra/anoncvs/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131:
> > for each function it appears in.)
> > /home/indra/anoncvs/ecos/packages/hal/i386/pc/current/src/plf_misc.c:132:
> > `hi' undeclared (first use in this function)
> > make[1]: *** [src/plf_misc.o.d] Error 1
> > make: *** [build] Error 2
> >
> > I've tried repeated my anoncvs update in another new directory, and build
> > it with the same way. But still, it gives the same error message.
> >
> > Please share your experiences, should I use another anoncvs site? Which
> > site? Or it's something wrong in my steps work.
> >
>
> This worked just fine for me.
>
> Exactly what did you change during your "vi ecos.ecc" step?
>
>
--
regards,
IndrA on 10:02, Aug 25
http://ic.ee.itb.ac.id/~antonius
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss