Re: [ECOS] Bug on PhyCore-MPC555 Port ?

[Andrew Lunn <andrew at lunn dot ch>]

On Fri, Oct 14, 2005 at 04:11:52PM +0200, Jean-Paul Garrigos wrote:
> Hi,
> 
> I m using the port for the mpc555 phycore.
> 
> I need for the project the serial port I/O.
> 
> When I compil the eCos project in RAM I got an Error :
> 
> make[1]: Entering directory 
> `/ecos-c/cygwin/home/lia/arch/powerpc-555/ecos/ram/mpc555-ram_build/devs/serial/powerpc/phy555/current'
> powerpc-eabi-gcc -c  
> -I/ecos-c/cygwin/home/lia/arch/powerpc-555/ecos/ram/mpc555-ram_install/include 
> -I/ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current 
> -I/ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src 
> -I/ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/tests 
> -I. 
> -I/ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src/ 
> -mcpu=505 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef 
> -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -mmultiple 
> -fno-rtti -fno-exceptions -finit-priority 
> -Wp,-MD,src/phy555_serial_with_ints.tmp -o 
> src/devs_serial_powerpc_phy555_phy555_serial_with_ints.o 
> /ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src/phy555_serial_with_ints.c
> In file included from 
> /ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src/phy555_serial_with_ints.c:57:
> /ecos-c/cygwin/home/lia/arch/powerpc-555/ecos/ram/mpc555-ram_install/include/pkgconf/io_serial.h:14:41: 
> pkgconf/io_serial_powerpc_cme555.h: No such file or directory
> /ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src/phy555_serial_with_ints.c:407: 
> warning: `mpc555_serial_init' defined but not used
> /ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src/phy555_serial_with_ints.c:456: 
> warning: `mpc555_serial_lookup' defined but not used
> /ecos-c/cygwin/opt/ecos/ecos-2.0/packages/devs/serial/powerpc/phy555/current/src/phy555_serial_with_ints.c:116: 
> warning: `mpc555_serial_funs' defined but not used
> make[1]: Leaving directory 
> `/ecos-c/cygwin/home/lia/arch/powerpc-555/ecos/ram/mpc555-ram_build/devs/serial/powerpc/phy555/current'
> make[1]: *** [src/phy555_serial_with_ints.o.d] Error 1
> make: Leaving directory 
> `/ecos-c/cygwin/home/lia/arch/powerpc-555/ecos/ram/mpc555-ram_build'
> make: *** [build] Error 2

eCos 2.0 is very old. I suggest you first upgrade to anonymous cvs.

http://ecos.sourceware.org/anoncvs.html

Do you have the package CYGPKG_IO_SERIAL_POWERPC_CME555 enabled in
your configuration?

        Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss