This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Help: RedBoot_RAM working, RedBoot_ROM not
- From: Rohit Pandita <pandi008 at umn dot edu>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Sun, 26 Feb 2006 17:12:24 -0600
- Subject: [ECOS] Help: RedBoot_RAM working, RedBoot_ROM not
Hi all,
I've been able to execute RedBoot_RAM on my board (Phycore555) finally,
now I'm trying to get the ROM version to work, that's where I have hit
another roadblock. I was able to build binary (.elf, came out to be
900+kB, is that usual?!) for RedBoot _ROM successfully using Configtool GUI.
Then I flashed it to the external ROM and reset, on reset I couldn't get
the RedBoot CLI on serial port A or B of mpc555. To rule out problems
with flash programmer issues, I re-flashed the same image using
Redboot_RAM and the RedBoot update method described in the
documentation, successfully. Still no luck with CLI!
I would appreciate if someone could offer help here. Thanks in advance
Rohit
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss