This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Adding redboot commands or parameters results in ROM image that won't run (but RAM image that will).
- From: "Shmuel Vagner" <Shmuel dot Vagner at celeno dot com>
- To: "Dave Rensberger" <dave at thingmagic dot com>, "Gary Thomas" <gary at mlbassoc dot com>
- Cc: "eCos Discussion" <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 14 Mar 2006 14:08:07 +0200
- Subject: RE: [ECOS] Adding redboot commands or parameters results in ROM image that won't run (but RAM image that will).
Dave (and List),
I have a similar problem.
Did you find a solution?
Thanks
Shmuel
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Dave
Rensberger
Sent: Friday, March 10, 2006 10:53 PM
To: Gary Thomas
Cc: eCos Discussion
Subject: Re: [ECOS] Adding redboot commands or parameters results in ROM
image that won't run (but RAM image that will).
Gary,
Thanks for the suggestion. I keep thinking that it must be something
more basic than that. I've attached a copy of my code. I think it's
about as simple as it could possibly be... As far as I can tell,
there isn't anything fundamentally different between the macro call
that adds my new command "pibinit" and any of the macro calls that
add the standard commands.
--Dave
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss