This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
problem executing ecos application
- From: Rohit Pandita <pandi008 at umn dot edu>
- To: ecos-discuss at sourceware dot org
- Date: Tue, 18 Jul 2006 07:01:03 -0500
- Subject: [ECOS] problem executing ecos application
Hi all,
Im trying to run a simple eCos application in target RAM. When I try to
load the executable through GDB it fails to load .text section to LMA
0x0080 0000 (Ext.RAM base address) with msg "packet
error,continuing...". Im presuming that this is an illegal operation
since RedBoot_ROM would have copied the VSR table to this location
(correct me if mistaken). Does anything look suspicious here?
eCos was configured for RAM startup, inherit console settings. Target:
PhyCore555. Thanks in advance.
Regards,
Rohit
objdump showed section header info,
Idx Name size VMA LMA
File Off Algn
0 .vectors 00000000 0x00800000 0x00800000 2b34a 2**0
1 .text 183f0 0x00800000 0x00800000 10000
2**2
......................
Disassembly,
00800000<__exception_reset>:
800000: ........................ lis r3,128
800004: ........................ ori r3,r3,16
800008: ........................ mtlr r3
80000C: ........................ blr
00800010<_start>:
800010: ........................ lis r3,0
800014 ......................... ori r3,r3,12290
......
....
..
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss