This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Not able to load/write RedBoot image on Avila board using JTAG (from GW).
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Bhanu Prakash Adhikari <bhanua at aztecsoft dot com>
- Cc: Avila <avila at lists dot unixstudios dot net>, ecos-discuss at sources dot redhat dot com
- Date: Wed, 02 May 2007 07:20:28 -0600
- Subject: Re: [ECOS] Not able to load/write RedBoot image on Avila board using JTAG (from GW).
- References: <93F0E3CFC1ABB646B8808894FC7CDD250B17419F@azindbaex01.aztec.soft>
Bhanu Prakash Adhikari wrote:
Setup -
GW2348 Avila board - 64 MB
JTAG
Parallel Port
MS-DOS
flash.exe version 1.1
RedBoot 2.02 (from GW)
I tried to load custom built RedBoot 2.02 for 64MB Avila (GW2348) board
using JTAG (from GW). I'm using MS-DOS to burn the inbuilt flash.
"flash.exe redboot-64.bin pv" gives no error.
(My flash.exe version doesn't support "o" option)
After programming and verifying is done, I powered-off the board and
unplugged JTAG and powered-on. To my surprise I see no input on
Hyperterminal.
Am I missing something crucial? Can some one help me with workable
redboot sample image, so that I can understand better on JTAG usage?
I'd suggest that you contact GW (whomever that is) as this is
not a general eCos or RedBoot question, but very specific to
their products.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss