This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Dos File system -
- From: "Alok Singh" <aloks at broadcom dot com>
- To: Maurice Müller <maurice dot mueller at web dot de>, <ecos-discuss at ecos dot sourceware dot org>
- Date: Mon, 28 May 2007 22:11:09 +0530
- Subject: RE: [ECOS] Dos File system -
- References: <465B059F.2050104@web.de>
Thanks a lot. Let me try it.
regards,
Alok
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Maurice Müller
Sent: Monday, May 28, 2007 10:09 PM
To: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Dos File system -
Hi,
which version of eCos are you using? 2.0? If you update to the current
CVS-version, you will see, that there is code for the fatfs, which is
the same as your so called DOS filesystem. I used the filesystem with an
IDE harddisk and recognized no problems.
Best regards
Maurice
Alok Singh schrieb:
> Hi, I saw some mail archives of 2001 that talk about DOS filesystem
> not being supported on eCos.
> Is it supported now? I browsed through the code, and saw jffs2, ramfs,
> and romfs support only. But
> Just wanted to confirm.
>
> regards,
> Alok
>
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss