This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Dropped characters
- From: "Laurie Gellatly" <laurie dot gellatly at netic dot com>
- To: "Sergei Gavrikov" <w3sg at SoftHome dot net>
- Cc: "eCos Discussion" <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 1 Jun 2007 21:56:38 +1000
- Subject: RE: [ECOS] Dropped characters
Hi Sergei,
We've ruled that out.
We tried a several character delay between each character on the transmit side
and still the characters are being dropped.
...Laurie:{)
-----Original Message-----
From: Sergei Gavrikov [mailto:w3sg@SoftHome.net]
Sent: Friday, 1 June 2007 8:55 PM
To: Laurie Gellatly
Cc: eCos Discussion
Subject: Re: [ECOS] Dropped characters
Ð ÐÑÐ, 01/06/2007 Ð 20:32 +1000, Laurie Gellatly ÐÐÑÐÑ:
> Hi all,
> I'm having troubles with the UART on our 2212 board.
> Its running at 115200 (talking to a 2103) but although the characters are on
> the wire OK
> some are being dropped.
> My code checks for characters being available in eCos and when 'sufficient'
> have arrived
> they are emptied from eCos's buffer (which is MUCH larger).
> I have not been able to isolate any pattern as to why they are being
> dropped.
> Does this sound familiar to anyone?
When I did try up eCos PPP between PC and my target (LPC2294) using a
serial connection, I couldn't achive the desired results for 115,2K
baudrate. But when I turned on the XON/XOFF flow control for eCos serial
driver, that became to work just fine. Do you use any flow control on
your system?
-- Sergei
>
> Thanks ...Laurie:{)
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss