Re: [ECOS] How to use the simulators

["badiu raz" <razone at gmail dot com>]

After searching a bit more through the mailing list I`ve found this
http://sourceware.org/ml/ecos-discuss/2005-09/msg00249.html and this
http://ecos.sourceware.org/docs-latest/ref/hal-synth-arch.html . I
have the same problem like Rutger Hofman could not get the simulator
working. My problem is that i can not use linux i can only use
windows. so i gues there is no solution for me:(
If you can tell me a solution or a workaround please do

sorry for the noobie questions hope i havent stressed you to much:D

On 11/6/07, badiu raz <razone@gmail.com> wrote:
> I am a newbie to ecos so i dont really understand how the simulator
> works. I`ve got your point but still dont know what to do. I`ve
> compiled the samples and run them in the simulator like previously
> shown. And all the instruction i`ve seen on the web do not mention any
> extra steeps. So if you could be so kind to tell me what I am doing
> (or not doing) wrong I will be most than grateful.(I just need to run
> the hello world program)
>
> Thanks,
> Razone
>
> On 11/6/07, Andrew Lunn <andrew@lunn.ch> wrote:
> > On Tue, Nov 06, 2007 at 02:33:10PM +0200, badiu raz wrote:
> > > I am using windows xp and the latest version of cygwin. About the
> > > serial port I dont understand. The application must only show messages
> > > on the screen
> >
> > You are not thinking embedded....
> >
> > How does the simulated hardware get access to the screen?
> >
> > On real hardware you have a serial port which you write debug messages
> > out. eCos has a device driver for the serial port and your hello world
> > will be using the serial port. But does the simulator have a simulated
> > serial port? Or is the serial drive just accessing memory addresses
> > that do nothing?
> >
> >        Andrew
> >
>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss