This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Re: Half Duplex RS485


Sorry for late reply.
Yes, when I specify appropriate deviceType in serial-channel-instance, the driver code will not check chip and just enable it.
So I explictly set deviceType for LPC2XXX's UART0, and intialize UART1 and other channels(of SC16C550) as before, then all channels works well with FIFO enabled.


> From: laurie.gellatly@netic.com
> To: ecos-discuss@sources.redhat.com
> Date: Sun, 27 Jan 2008 07:40:53 +1100
> Subject: RE: [ECOS] Re: Half Duplex RS485
>
> Hi Wang,
> I've been looking through the patch you sent.
> I don't see any change to the FIFO handling unless you mean where
> it figures out the deviceType?
>
> ...Laurie:{)
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>

_________________________________________________________________
手机也能上 MSN 聊天了,快来试试吧!
http://mobile.msn.com.cn/

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]