This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [Yaffs] YAFFS2 in eCOS


[Forwarded from the YAFFS mailing list also to the eCos list]

Currently eCos has no real support for NAND flash. However, at this very moment I am working on that -- it is the main part of my job right now. Status: my pilot eCos NAND flash layer is working right now on my BlackFin, including Bad Block Table, ECC, etc. But before I publish, I need lots more stress testing.

I am also going to run YAFFS2 on this eCos NAND Flash layer. I just started making an eCos wrapper for it.

If you would like to join me in stress testing, well, I welcome that.

Rutger Hofman
VU Amsterdam

Deroo Stijn wrote:
Hi,

Does someone have some documentation on how to integrate yaffs2 into the eCOS operating system?
On the yaffs internet page, I found some documentation about yaffs1, but there isn't any doc describing yaffs2.

Kind regards,
Stijn Deroo




--- Stijn Deroo R&D Engineer Televic Transport Systems http://www.televic.com Televic NV / SA (main office) Leo Bekaertlaan 1 B-8870 Izegem Tel: +32 (0)51 303045 Fax: +32 (0)51 310670

_______________________________________________
yaffs mailing list
yaffs@lists.aleph1.co.uk
http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]