This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re:[ECOS] Can You recommend a good entry board
- From: Tomas Pop <Tomas dot Pop at seznam dot cz>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 31 Oct 2008 16:28:37 +0100 (CET)
- Subject: Re:[ECOS] Can You recommend a good entry board
Hi,
I'm working with Arcom Viper lite ( based on ARM ). It was designed also for learning, it has four switches and three diodes on the connected IO board.
There was written a book about programming for this board, this book also contains reference to port of Ecos for this board and some examples how to start.
I port on it I think nontrivial application, only thing that is not working properly under Ecos ( at least for me ) is the networking support, but I don't need it so much, so I maybe didn't spend enought time to find a solution of this network problems.
More info:
http://www.arcom.com/pc104-xscale-viper-lite.htm
http://oreilly.com/catalog/9780596009830/
T.
> ------------ Původní zpráva ------------
> Od: Martin Hansen <farhansen@gmail.com>
> Předmět: [ECOS] Can You recommend a good entry board
> Datum: 31.10.2008 11:55:48
> ----------------------------------------
> Hi
>
> I hope some of You will share a little of Your experience
>
> I am looking for a target well suited for learning eCos, that means
> * the template/drivers has been there for a while, (and been used.) So
> I don't mix my learning with driver debugging.
> * price is somewhat of an issue
> * GUI and other fancy interfaces is not an issue, I probably just need
> some LED's and buttons, if one button can generate interrupt its a
> plus factor.
>
> Well the stability of the port is my highest concern, and the question
> where experience is the key.
>
> --
> Regards Martin
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
>
o0O0o.o00o.oOo.o..
__________________Tomas Pop
email: Tomas.Pop@seznam.cz
www.tydlin.cz
ICQ#: 486-598-279
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss