This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Ecos on the Technologic Systems - TS7300


http://arm.cirrus.com/files/linux/releases/linux-2.6/1.0.3/linux-crater_
1-0-3/packages/bootloader/ecos/ecos-edb93xx.patch


Patch for Ecos using this version of Ecos source.

http://arm.cirrus.com/files/linux/packages/ecos-i386linux.tar.bz2




-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com] 
Sent: Friday, November 14, 2008 12:20 PM
To: Austin, Brian
Cc: James Bewley; ecos-discuss@sources.redhat.com; Mike Nelis
Subject: Re: [ECOS] Ecos on the Technologic Systems - TS7300

Austin, Brian wrote:
> Yes.

Please don't top-post :-(

> 
> Have you tried building for an EP9302?

He'd have to get the eCos sources from Cirrus Logic.  James, have
you explored this?

Also, can you get the sources to TSBOOT?  That would help your
cause quite a lot.

> Did it build ok?
> 
> 
> -----Original Message-----
> From: ecos-discuss-owner@ecos.sourceware.org
> [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of James
> Bewley
> Sent: Friday, November 14, 2008 12:11 PM
> To: ecos-discuss@sources.redhat.com; Mike Nelis
> Subject: [ECOS] Ecos on the Technologic Systems - TS7300
> 
> Hi all,
> 
> I'm interested in getting ecos running on the TS7300 SBC, although it
> currently looks like this board is unsupported.  So without getting
> too far into the ecos code to port it i've been compiling redboot
> using several configs, one for TS7250 and more generic configs based
> around the Cirrus logic EP9302 arm.
> 
> Has anyone managed to get ecos/redboot running on this SBC or even the
> EP9302?
> 
> I'm interested in getting redboot on this board as it currently only
> has TSBOOT, a very limited bootloader supplied by TS.  I have however
> been using TSBOOT to load redboot into ram and executing it from
> there.
> 
> This board lacks JTAG or any other ICE interface so i guess my main
> priority at the moment it to get some output from COM1 for debugging.
> 
> Any help would be much appreciated.
> 
> 
> Regards,
> 
> James Bewley
> 


-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------



--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]