This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Timer 5 channel 3 is not working in ecos


gaurang wrote:
> Hi,
>         I configure timer 5 and all channels for pwm output and gpio A as an
> alter function push-pull.
> I am getting pwm output on timer 5 and channel 1,2 and 4,but i am not
> getting pwm out on gpio A pin 2 and this pin is working good when i use
> general purpose output.
> Anyone help for why do me not get pwm output on port A pin 2 in ecos?
> 

What platform?

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]