This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: running test cases


Hello again

So I gave up with virtual box and installed cygwin.
Now when I run the gdb command I am returned to the shell prompt nothing
else happens!

The manual states 
Start a command shell (such as a Cygwin shell window in Windows) with the
environment variables set as described in the toolchain documentation

Where is the toolchain documentation, what environment variables do I need?

thanks

Graham


Sergei Gavrikov-4 wrote:
> 
> On Mon, Apr 06, 2009 at 02:14:15AM -0700, grahamlab wrote:
>> 
>> Hi Sergei
>> 
>> I am sure I have the correct settings in mincom but still cannot download
>> a
>> file
>> 
>> Is there anything else I can try?
> 
> Please, do not top post.
> 
> So, you have the success with HT (!VM). VM's serial ports are something
> specific. It may work, it may not work. But there is a light in a tube.
> You can try to use serial-to-tcp bridge. It's software what you can run
> on the host (windows) and all data flow from/to the real serial port
> will be directed to/from the specified TCP port.
> 
> If you disable serial ports handling in VM, start such a bridge program,
> then it can be possible (I hope) to connect on the specified TCP port
> using GDB on guest (Linux). Can you ping the Host PC from the Guest OS?
> 
> ... And what's wrong with cygwin environment?
> 
> Sergei
> 
>> 
>> Graham
>> 
>> Sergei Gavrikov-4 wrote:
>> > 
>> > On Mon, Apr 06, 2009 at 01:55:02AM -0700, grahamlab wrote:
>> >> 
>> >> At last some success!!
>> >> I can download a file using hyperterm.
>> >> I cannot do this in minicom, I think it may have to do with flow
>> control.
>> >> How do I set flow control in the Linux environment?
>> > 
>> > Using minicom:
>> > 
>> > ^A-o
>> >   Serial port setup
>> >     ...
>> > 
>> > 
>> > Or prepare
>> > 
>> > cat >~/.minicom.redboot <<EOF
>> > pu port             /dev/ttyS0
>> > pu baudrate         38400
>> > pu bits             8
>> > pu parity           N
>> > pu stopbits         1
>> > pu rtscts           No
>> > EOF
>> > 
>> > and then run minicom as 'minicom -o redboot'
>> > 
>> > To check the settings
>> > 
>> > $ stty -a -F /dev/ttyS0	;# man stty, man minicom.
>> > 
>> > Sergei
>> > 
>> >> Graham
>> >> 
>> >> Sergei Gavrikov-4 wrote:
>> >> > 
>> >> > grahamlab wrote:
>> >> >> 
>> >> >> I follow Sergei's instructions and get the minicom upload screen -
>> but
>> >> >> then
>> >> >> nothing happens.
>> >> >> When I try from Hyperterm it says "no response from remote system"
>> >> >> 
>> >> >> Graham
>> >> > 
>> >> > I just wonder, Do you enter `load' command in RedBoot before to
>> start
>> >> > the upload?
>> >> > 
>> >> > Redboot> load -r -b %{freememlo} -m ymodem
>> >> > C
>> >> > 
>> >> > At once, as you hit <Enter> you have to see 'C' letter and then you
>> >> must
>> >> > start upload ('send file' in HT). Again, what's about flow control?
>> >> > Valid settings are 38400,n,8,1 (no software/hardware flow control).
>> >> > 
>> >> > 
>> >> > Sergei
>> >> > 
>> >> > -- 
>> >> > Before posting, please read the FAQ:
>> >> http://ecos.sourceware.org/fom/ecos
>> >> > and search the list archive:
>> http://ecos.sourceware.org/ml/ecos-discuss
>> >> > 
>> >> > 
>> >> > 
>> >> 
>> >> -- 
>> >> View this message in context:
>> >> http://www.nabble.com/running-test-cases-tp22873616p22904693.html
>> >> Sent from the Sourceware - ecos-discuss mailing list archive at
>> >> Nabble.com.
>> >> 
>> >> 
>> >> -- 
>> >> Before posting, please read the FAQ:
>> http://ecos.sourceware.org/fom/ecos
>> >> and search the list archive:
>> http://ecos.sourceware.org/ml/ecos-discuss
>> > 
>> > -- 
>> > Before posting, please read the FAQ:
>> http://ecos.sourceware.org/fom/ecos
>> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>> > 
>> > 
>> > 
>> 
>> -- 
>> View this message in context:
>> http://www.nabble.com/running-test-cases-tp22873616p22904967.html
>> Sent from the Sourceware - ecos-discuss mailing list archive at
>> Nabble.com.
>> 
>> 
>> -- 
>> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> 
> -- 
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> 
> 
> 

-- 
View this message in context: http://www.nabble.com/running-test-cases-tp22873616p22906503.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]