This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: arm-eabi-gdb
Sergei Gavrikov-4 wrote:
>
> grahamlab wrote:
>
> [snip]
>
>> I did not have mincom running.
>
> Graham,
>
> here http://ecos.sourceware.org/ml/ecos-discuss/2009-04/msg00041.html
> you said opposite thing.
>
> It's important to know: can you interact with the board using minicom on
> guest VM? It's pity that you did not follow those my tips (lsof, fuser,
> stty) http://ecos.sourceware.org/ml/ecos-discuss/2009-04/msg00067.html
>
> Can you paste the outputs?
>
> Sergei
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
Sergei
When I try to send a file using minicom I get the ymodem upload screen - it
is blank and remains so
lsof /dev/ttyS* - returns with no output
fuser /dev/ttyS* - returns with no output
output from stty -
speed 38400 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt =
^R;
werase = ^W; lnext = ^V; flush = ^O; min = 0; time = 10;
-parenb -parodd cs8 -hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon
-ixoff
-iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
vt0 ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt
-echoctl -echoke
Does this give you any clues?
Thanks Graham
--
View this message in context: http://www.nabble.com/arm-eabi-gdb-tp22908205p22912027.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss