This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Confusing compilation problem


On Fri, Apr 10, 2009 at 12:59:19AM -0700, grahamlab wrote:
> Sergei Gavrikov-4 wrote:
> > 
> > On Fri, Apr 10, 2009 at 12:30:56AM -0700, grahamlab wrote:
> >> 
> >> Hello all
> >> I am trying to evaluate the best way for me to use ecos for my project -
> >> to
> >> use the configtool or command line interface.
> >> So I 
> >> 1.created an ecos build using from command line using the default
> >> template.
> >> 2.executed the make command to build ecos
> >> 3.created a testbed directory and created a hello world application
> >> 4.compiled and linked successfully
> >> Next I
> >> 1 created an ecos build using the configuration tool
> >> 2 created a test bed directory and created a hello world application
> >> 3 this does not compile and gives the following errors -
> >> test.cpp: In function âint main()â:
> >> test.cpp:6: error: âprintfâ was not declared in this scope
> >> 
> >> Both use the same makefile and make.params files(atached) - the only
> >> changes
> >> were to point to the correct install directory.
> > 
> > Graham, not only
> > 
> >   /tmp$ diff configtool_Make.params cli_Make.params 
> >   5c5
> >   < export PREFIX := /home/graham/ecos/DevBoard_install
> >   ---
> >   > export PREFIX := /home/graham/lab1/install
> >   7c7
> >   < export CC := $(COMMAND_PREFIX)gcc
> >   ---
> >   > export CC := $(COMMAND_PREFIX)g++
> > 
> > 
> >   /tmp$ diff configtool_Makefile cli_Makefile
> > 
> > 
> > Are you really going program in C++? Try rename your main.cpp in the
> > main.c.
> > 
> > BTW, the short plain text files you can just attach.
> > 
> > Sergei.
> > 
> >> If I point the configtool version at the commandline version install tree
> >> it
> >> will compile
> >> 
> >> Could some one explain why this is?
> >> 
> >> Thanks
> >> 
> >> http://www.nabble.com/file/p22984314/configtool_Make.params
> >> configtool_Make.params 
> >> http://www.nabble.com/file/p22984314/configtool_Makefile
> >> configtool_Makefile 
> >> http://www.nabble.com/file/p22984314/cli_Make.params cli_Make.params 
> >> http://www.nabble.com/file/p22984314/cli_Makefile cli_Makefile 
> >> Graham
> >> 
> >> -- 
> >> View this message in context:
> >> http://www.nabble.com/Confusing-compilation-problem-tp22984314p22984314.html
> >> Sent from the Sourceware - ecos-discuss mailing list archive at
> >> Nabble.com.
> >> 
> >> 
> >> --
> >> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> >> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> > 
> > -- 
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> > 
> > 
> > 
> Helo again Sergei
> 
> Beleive me I have tried muliple permutations using both g++ and gcc

I hope that your Make.params were not handy tweaked.

> The cli vesrion compile with both g++ and gcc
> The config tool version compiles with neither.
> 
> It seems that you cannot switch between a cli build and a configtool build
> I am a little confused but will investigate further.
> Do you use the cli exclusively or do you switch between the 2?

I have used CLI only, but I have eCos configtool installed too. I will
try to reproduce your issue.

Sergei

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]