This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: redboot for 8MB flash


Hi,

you may have to change the flash config package also because the flash package tries to identify the flash at boottime. Just take a look which flash configure (hardware) package you're currently using.

Greetings,
Martin Laabs

keerti@mrt-communication.com schrieb:
Dear ALL,

I have build redboot for 4MB flash for RDC3210 board.Now i have replaced
4MB with 8MB flash,I changed the addresses but then too i am not able to
boot the board.

Can any one please tell me what are all the codes where i need to change
for 8MB flash ,so that my board boots.

With regrads,
Keerti



--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]