This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: redboot for 8MB flash
Martin Laabs wrote:
> Hi,
>
> you may have to change the flash config package also because the flash
> package tries to identify the flash at boottime. Just take a look which
> flash configure (hardware) package you're currently using.
>
> Greetings,
> Martin Laabs
>
> keerti@mrt-communication.com schrieb:
>> Dear ALL,
>>
>> I have build redboot for 4MB flash for RDC3210 board.Now i have replaced
>> 4MB with 8MB flash,I changed the addresses but then too i am not able to
>> boot the board.
>>
>> Can any one please tell me what are all the codes where i need to change
>> for 8MB flash ,so that my board boots.
>>
>> With regrads,
>> Keerti
Maybe if we knew what an "RDC3210" was - it's not in CVS - we
could comment better.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss