This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: Re: How to send UDP broadcast to 255.255.255.255?

From: Stanislav Meduna <stano at meduna dot org>
To: Mandeep Sandhu <mandeepsandhu dot chd at gmail dot com>, eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
Date: Wed, 12 Aug 2009 15:24:58 +0200
Subject: Re: [ECOS] Re: How to send UDP broadcast to 255.255.255.255?
References: <4A8172DA.4070001@meduna.org> <b18c5f790908112202lc895840lcdb11b914d785248@mail.gmail.com>

Mandeep Sandhu wrote:

>> I am able to send the broadcasts as I intended.
> 
> Are you using UDP or RAW sockets?

UDP

> I've also setup my default route to point to eth0.
> 
> But when the UDP packet goes out, I see that it's corrupted.

I did not inspect it carefully, but the receiver was able
to receive it.

-- 
                                  Stano

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

References:
- Re: Re: How to send UDP broadcast to 255.255.255.255?
  - From: Stanislav Meduna
- Re: Re: How to send UDP broadcast to 255.255.255.255?
  - From: Mandeep Sandhu

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]