[ECOS] Re: Getting error in ecos/ GDB: found solution by "set endian big" but another prob

[Ajit Mittal <ajitmittal at gmail dot com>]

I found the problem using ecos old mailing list:

Another prob:

But how to fix this problem, when loading program through redboot like

load -r -v -b %{FREEMEMLO} basic1
and exec command give gdb protocol strings like $T050f:01000000;0d:01fc0fec;#d6
How to make it take as big endian.

Thanks
---------------------
Here is the output from working gdb.



Remote communication error: Connection reset by peer.
aryan@aryan-desktop:~/test2$ xscale-elf-gdb -nw
GNU gdb xscale-030422
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnulibc2.2
--target=xscale-elf".
(gdb) set endian big
The target is assumed to be big endian
(gdb) target remote 192.168.5.217:9000
Remote debugging using 192.168.5.217:9000
0x5002097c in ?? ()
(gdb) load basic1
Loading section .rom_vectors, size 0x40 lma 0x100000
Loading section .text, size 0x13464 lma 0x100040
Loading section .rodata, size 0x4ac lma 0x1134a4
Loading section .data, size 0x3ec lma 0x113950
Start address 0x100040, load size 81212
Transfer rate: 324848 bits/sec, 303 bytes/write.
(gdb) continue
Continuing.
Hello, eCos world!
---------------------------------------------------------------------------------
On Sat, Aug 22, 2009 at 2:07 AM, Ajit Mittal<ajitmittal@gmail.com> wrote:
> How to fix this problem. This is IXP425 based board with 8MB flash and
> 32 MB RAM.
> I am getting this error:
> -----------------------------------------------------
> home@home-desktop:~/test2$ xscale-elf-gdb -nw
> GNU gdb xscale-030422
> Copyright 2002 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you are
> welcome to change it and/or distribute copies of it under certain conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB. ?Type "show warranty" for details.
> This GDB was configured as "--host=i686-pc-linux-gnulibc2.2
> --target=xscale-elf".
> (gdb) target remote 192.168.5.217:9000
> Remote debugging using 192.168.5.217:9000
> Cannot access memory at address 0xfc0ffc01
> 0x7c090250 in ?? ()
> (gdb) load basic1
> Loading section .rom_vectors, size 0x40 lma 0x100000
> Loading section .text, size 0x13464 lma 0x100040
> Loading section .rodata, size 0x4ac lma 0x1134a4
> Loading section .data, size 0x3ec lma 0x113950
> Start address 0x100040, load size 81212
> Transfer rate: 46406 bits/sec, 303 bytes/write.
> (gdb) continue
> Continuing.
>
> Program received signal SIGBUS, Bus error.
> Cannot access memory at address 0xfc0ffc01
> 0x00100040 in ?? ()
> (gdb)
> -------------------------
> I also checked
> home@home-desktop:~/test2$ xscale-elf-objdump -f basic1
>
> basic1: ? ? file format elf32-bigarm
> architecture: xscale, flags 0x00000112:
> EXEC_P, HAS_SYMS, D_PAGED
> start address 0x00100040
> --------------------------------------
>
> Thanks
> Ajit
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss