This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Flash support for EA-LPC2468-16 OEM board
Hi, Sergei
I also added 'Generic FLASH memory support' (or CYGPKG_IO_FLASH). But
gives same error.
With out enable assert, it gives: Flash: driver init failed. Invalid flash
address.
When I enable the assert, it gives: ASSERT FAIL: [228]cyg_flash_init()
incorrect number of flash devices.
Please reply me.
Thanks,
Viren
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Sergei Gavrikov
Sent: Wednesday, February 24, 2010 2:47 AM
To: viren.dobariya@aftek.com
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Flash support for EA-LPC2468-16 OEM board
Viren Dobariy wrote:
> hi,
> I am using Embedded Artist LPC2468-16 Board.
> I load redboot with out flash suppot. it's woking fine. For flash
> support i add SST39vxx package from config tool, then it gives error
> given below.
> ASSERT FAIL: [228]cyg_flash_init() incorrect number of flash
> devices. can anyone suggest me, what is missing in config tools??
> or any other help???
>
> Thanks,
> Viren
Hi Viren,
How you manage that? That package (which is labeled in `configtool' as
'Support for SST 39VFXXX flash memory', CYGPKG_DEVS_FLASH_SST_39VFXXX)
is already included in default hardware template for `ea2468' target.
Be sure that you add package is labeled in `configtool' as a 'Generic
FLASH memory support' (or CYGPKG_IO_FLASH).
Please, report if you'll get FLASH working in RedBoot for the target.
Sergei
--
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss