This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re dboot + Flash driver for 2k page size


Hi all,

I am a newbie in ecos. I am working to reboot my arm board TS-7250 from the
flash on my board, which holds 128M flash and 64M RAM.

Now, I can use a serial blaster to boot into the redboot prompt. But I found
that the compiled redboot can not work with my flash. My flash is SAMSUNG
K9F1G08U0B, whose page size is 2K. Therefore, my redboot can not recognize
the flash. When I try to "fis write" the bootrom file into the flash, the
error information is as follows:

Invalid FLASH address 0x60000000: FLASH sub-system not initialized
     valid range is 0x00000000 - 0x00000000

When I typed in "version" under redboot prompt, the information is as
follows:

RAM: 0x00000000 - 0x02000000 [0x00053750 - 0x01ffd000] available
FLASH: 0x00000000 - 0x00000001, 0 blocks of 0x00000000 bytes each.

So, could anybody share your redboot with me to fix this problem about
enabling nand 2k flash? Thank you so much.

Best Regards,
Lux
-- 
View this message in context: http://old.nabble.com/Redboot-%2B-Flash-driver-for-2k-page-size-tp30398030p30398030.html
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]