This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
eCos application offset for Redboot load
- From: gmail <jjdebarros at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 08 Aug 2011 16:25:45 -0700
- Subject: [ECOS] eCos application offset for Redboot load
I am trying to build an eCos application (and the test suite) to load
onto a board with a Redboot monitor.
I've created an xxx_ram.ldi / .h for the board but don't know if I need
to add in the offset in that file for the Redboot monitor or if that is
done elsewhere.
The monitor indicates:
Platform: TS-7250 Board (ARM920T) Rev A
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x02000000, [0x000530c0-0x01fdd000] available
FLASH: 0x60000000 - 0x68000000, 1024 blocks of 0x00020000 bytes each.
Do I change the text base in the .ldi to something above 0x000530c0?
Thanks
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss