This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: help to find LPC1766 STK port
- From: John Dallaway <john at dallaway dot org dot uk>
- To: abhishek srivastava <just_abhi22 at yahoo dot co dot in>
- Cc: eCos Discussion <ecos-discuss at sourceware dot org>
- Date: Fri, 06 Sep 2013 09:56:46 +0100
- Subject: Re: help to find LPC1766 STK port
- Authentication-results: sourceware.org; auth=none
- References: <1378442743 dot 47247 dot YahooMailNeo at web193203 dot mail dot sg3 dot yahoo dot com>
Hi Abishek
On 06/09/13 05:45, abhishek srivastava wrote:
> i want to port ecos on LPC1768 but not able to find out port
> for LPC1766 in redboot guide or configtool or in anoncvs repository.
> even though in supported hardware, it shows that this board
> is supported !!
>
> can anyone plese provide me the link to find the port location
> in anoncvs repository, how to configure ecos or redboot for target
> if template not specified ??
The LPC1766 port is definitely present in the eCos CVS repository. In
configtool you would select the "Olimex LPC-1766-STK" hardware template.
With ecosconfig, you would specify "lpc1766stk" as the target name.
Make sure that your eCos repository is up to date, including "ecos.db".
I hope this helps...
John Dallaway
eCos maintainer
http://www.dallaway.org.uk/john
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss