This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Re: RAM checking for RedBoot fis load command
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: Chris Garry <cgarry at sweeneydesign dot co dot uk>
- Cc: ecos-patches at sources dot redhat dot com
- Date: Thu, 24 Apr 2003 04:33:23 +0100
- Subject: Re: RAM checking for RedBoot fis load command
- References: <005c01c3099e$dff0aa40$500ba8c0@jasper>
Chris Garry wrote:
When the 'fis load' command is used, a check is performed to see if the
image is being loaded into RAM. If not the message "Not a loadable
image" is displayed and the load is aborted.
Surely this check should only be performed when
CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS = 1.
The attached patch implements this.
Quite right too. Applied.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine