This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Re: New port for ARM Industrial Module AIM 711 ( 2 ) - Checked by AntiV
- From: Roland Caßebohm <roland dot cassebohm at VisionSystems dot de>
- To: Andrew Lunn <andrew at lunn dot ch>
- Cc: ecos-patches at ecos dot sourceware dot org
- Date: Thu, 13 May 2004 17:07:23 +0200
- Subject: Re: New port for ARM Industrial Module AIM 711 ( 2 ) - Checked by AntiV
- References: <200404291559.49435.roland.cassebohm@visionsystems.de> <20040513141008.GO25516@lunn.ch>
Am Donnerstag, 13. Mai 2004 16:10 schrieb Andrew Lunn:
> On Thu, Apr 29, 2004 at 03:59:49PM +0200, Roland Ca?ebohm
wrote:
> > Hi,
> >
> > this is the improved port for the ARM Industrial Module
> > AIM 711 from Vision Systems GmbH.
>
> It looks like the serial drivers is a cut&paste of the
> e7t driver with all the functions names renamed. Is it
> possible to actually use the e7t driver as is?
Yes the driver is just a copy of the e7t driver, but I have
made it like the generic 16550 driver, that it could be
used from different platforms, which is not the case in the
original e7t driver. There are the snds100, e7t and the
aim711 platform which have the s3c4510 processor from
Samsung.
If you like I could make some packages for e7t and snds100,
which use the generic s3c4510 driver.
Here are some related links:
http://ecos.sourceware.org/ml/ecos-devel/2003-10/msg00037.html
http://sources.redhat.com/ml/ecos-patches/2004-02/msg00036.html
Roland
--
___________________________________________________
VS Vision Systems GmbH, Industrial Image Processing
Dipl.-Ing. Roland Caßebohm
Aspelohe 27A, D-22848 Norderstedt, Germany
Mail: roland.cassebohm@visionsystems.de
http://www.visionsystems.de
___________________________________________________