This is the mail archive of the
ecos-patches@sources.redhat.com
mailing list for the eCos project.
Re: [patch] xscale irq-table
- From: Andrew Lunn <andrew at lunn dot ch>
- To: Daniel Schmidt <Daniel dot Schmidt3 at gmx dot de>
- Cc: ecos-patches at sources dot redhat dot com
- Date: Thu, 30 Sep 2004 11:04:17 +0200
- Subject: Re: [patch] xscale irq-table
- References: <28772.1096466278@www7.gmx.net>
On Wed, Sep 29, 2004 at 03:57:58PM +0200, Daniel Schmidt wrote:
> hello,
>
> as written before the interrupt-vector-table in
> arm/arch/current/include/hal_intr.h: hal_interrupt_{handlers|data|objects}
> is to short for the pxa2x0. So you can not append interrupts for the upper
> 8 GPIOs (78..85).
>
> I've attached the patch; please apply.
This is not the correct way to do it. You should add the extra
#define CYGNUM_HAL_INTERRUPT_GPIO81 (96+17)
...
#define CYGNUM_HAL_INTERRUPT_GPIO85 (95+...
Then change
#define CYGNUM_HAL_ISR_MAX
Please could you send a patch doing it this way.
Thanks
Andrew