Re: ecos.db patches for at91sam7xek

[Neha Makhija <neha dot makhija at honeywell dot com>]

Tim michals <tcmichals <at> yahoo.com> writes:

> 
> Ok, I have one working, I will attempt a merge etc.  Thanks.,....
> 
> ----- Original Message ----
> From: Andrew Lunn <andrew <at> lunn.ch>
> To: Wolfgang K?bler <wk <at> koebler.com>
> Cc: Tim michals <tcmichals <at> yahoo.com>; ecos-patches <at> 
ecos.sourceware.org
> Sent: Tuesday, October 17, 2006 11:51:35 AM
> Subject: Re: ecos.db patches for at91sam7xek
> 
> On Tue, Oct 17, 2006 at 12:34:11AM +0200, Wolfgang K?bler wrote:
> > Hi,
> > 
> > On 16-Oct-2006 Tim michals wrote:
> > > I have a demo board so I can do some USB testing and move forward on
> > > Ethernet.... 
> > Hint about Ethernet:
> > The at91sam7x eth is similar, but not identical to at91rm9200 eth.
> > I think they are similar enough so that the driver can be based on one
> > common source file (with conditional compilation). I think this would be
> > better than two seperate drivers. Whoever writes an eth driver for one of 
the
> > chips should have a look at the other chip.
> 
> This was my plan. However i got side tracked and have not worked on
> the ethernet driver for over a month. I know John Eigelaar was also
> working in this area, but he has gone quiet recently, so i've no idea
> how far he has got.
> 
>     Andrew
> 
> 


hi all

i am also working on this ecos. i have to enable the network on the AT91RM9200 
development kit. But i am facing sum problem. whenevr i tries to ping the board 
it says request timed out.But if redboot is loaded at that time ping is 
sucessful but when i run my application and at that time i tries to ping i am 
facing the problem ie i m not able to ping.

kindly suggest me the way out, if possible.


Thanks
neha